Designed by
Pin-Ru, Shih
Personal design / 2022 / Product design
Pin-Ru, Shih
Personal design / 2022 / Product design
/
將生硬的充電器外型以擬物的設計方法詮釋。插腳視為鳥類的腳掌，打開使用與合起收納呼應動物站立與坐下的行為，並將充電器塊體斜切，上半部形同頭與翅膀，下半部做為肚子、屁股。透過拆件，在不同的部件上使用紋理設計差異，讓產品更具層次感，從而達到視覺減薄的效果，同時挑戰超聲波斜面接合的製程。
Interpret the rigid appearance of the charger with a quasi-physical design method. The prongs are regarded as the soles of the feet of birds. When opened and closed for storage, they echo the behavior of animals standing and sitting down. The charger block is cut obliquely, with the upper part shaped like the head and wings, and the lower part serving as the belly and butt. Through disassembly, texture design differences are used on different parts to make the product more layered, thereby achieving a visual thinning effect and challenging the ultrasonic bevel joining process.
氮化鎵 GaN 是一種新型的半導體材料，它比傳統的矽（Si）和砷化鎵（GaAs）更能在高溫、高壓、高頻率和高電流下保持穩定，而且效率更高、開關速度更快。這些優點讓氮化鎵成為快速充電的理想材料，因此有「快速充電的未來」之稱。這也是 Allite B2 所使用的技術。
GaN is a new type of semiconductor material that is more stable at high temperatures, high voltages, high frequencies and high currents than traditional silicon (Si) and gallium arsenide (GaAs), and has higher efficiency and switching speed. These advantages make GaN an ideal material for fast charging, so it is called the "future of fast charging." This is also the technology used by Allite B2.
有別於一般充電器雙孔输出無法進行快充，Allite B2 在雙孔同時充電時，Type-C 依然能維持快充功能，而單孔使用 Type-C 時輸出功率可高達 32W。
智能配電使裝置處於低電量時自動開啟快充，滿電時自動切換至涓流充電。
Unlike the general charger dual-hole output can not be fast charged, Allite B2 can still maintain the fast charging function when charging two devices at the same time, and the output power can be up to 32W when using single-hole Type-C.
Intelligent power distribution automatically turns on fast charging when the device is low power, and automatically switches to trickle charging when the power is full.
為什麼需要一款快充？
過去原廠附贈的豆腐頭僅有 5W，並沒有任何快充功能，實測將 iPhone 由 0% 充到 100% 需要耗費兩個小時以上！使用 Allite B2 快充僅需要 30 分鐘就可以充飽 50%。
Why do you need a fast charger?
In the past, the charging head that came with the original factory only had 5W and did not have any fast charging function. It was actually measured that it took more than two hours to charge the iPhone from 0% to 100%! Using the Allite B2 fast charger only takes 30 minutes to get a 50% charge.
