It is exciting to install a brand new CCTV system in your house. But when it comes to electronic products, there will be some technical issues that you will need to face. When installing or adding CCTV at your premise, one of the common issues that you will face is your CCTV cabling for your security system.

CCTV is one of the must-have accessories for your CCTV, especially if you are installing a wired CCTV system. It is important that you need to understand your CCTV cabling. You will want to know the different types of cabling used in various situations regarding CCTV installations.

You will want to ask yourself which cabling works for which CCTV and will CCTV cabling causes video loss or cable failure. You will want to understand what your CCTV cabling will caused to your CCTV before you experience any cable failure.

IP CCTV is the most common option nowadays. If installing a brand new CCTV system, you will look towards IP CCTV. The CCTV cabling for IP CCTV is cat5e Ethernet cables. It can send both power and data to your CCTV. Some IP CCTV may require a power supply. You can use POE (power over ethernet) to send power to your IP CCTV via the cat5e cabling.

You will want to take note that that are a few CCTV cabling that IP CCTV uses, which are Cat 3, Cat 5, Cat 5e, and Cat 6. The higher the Cat rating, the faster the transmission speed and max bandwidth. The most common that is used now is Cat 5e.

If you already have a CCTV system on your premise or add additional CCTV to your existing infrastructure, you may incorporate both analog and digital components. Analog CCTV uses RG-59 Siamese cables to send power and received video from your CCTV.

CCTV cabling failure is one of the main reasons that will cause your CCTV to break down. Depending on how much you rely on your CCTV system, this can be costly for many reasons, such as wasting time, effort, and resources. This won’t be an issue if the CCTV is installed correctly.

You must consider how you will use the CCTV cabling to choose the suitable cable for your CCTV system. The requirement can include temperature range, jacket material, cable structure, etc.

You will need to understand why typical cable failure occurs. When you know the cause, you can prevent buying the wrong CCTV cabling the second time. Here are some of the most common CCTV cables you want to understand more about.

Different cables can flex differently. You will need to buy the correct cable for your CCTV system. The copper conductors can break if you buy the wrong kind of CCTV cabling and twist it around too much.

When the insulated conductors are twisted the wrong way, it can cause a loss of continuity. When choosing a suitable cable, you need to know your CCTV position to plan your CCTV cabling. You need to buy the proper cable if you plan to bend and twist your network cabling a lot.

Another common reason that causes CCTV cabling failure is insulation damage. The breakdown of the insulation depends on how to stress the voltage, and the degradation of the insulation. It may also happen when there is a sudden overvoltage condition.

Your conductor’s integrity can be compromised when the insulation breaks. A few reasons will cause your insulation to be damaged, such as the cable being bent and putting the cable under constant stress, an abrasion within the cable structure, or a breakage in the conductor strand.

Corkscrewing is also another common CCTV cabling failure. What is corkscrewing? It is what it sounds like. The damage to the cable makes it look like a corkscrew. It has a small tight twist. Most of the time, it will happen in motion applications. It is because of the constant flexing and repetitive motions which will deform the cable and destroy the core.

This type of cable failure is common with premade ethernet cabling strung together rather than making your Ethernet cabling. Corkscrewing happens when the torsion is released because of incorrect cable configuration, direction, and length.

Common CCTV Cabling Failure #4 — Jacket Damage

Another common CCTV cabling failure is jacket abrasion. It is similar to the loss of continuity and insulation damage, but jacket abrasion refers to the outer material. It is what houses all the conductors of the ethernet cable.

Jacket abrasion is when the outer cable jacket wears through the underlying layer of conductors. Usually, it will happen when the cable has a soft jacket. It can also occur when the cable swells because of exposure to oils, chemicals, or heat, as the cable may not be designed to withstand.

When the temperature of your room where the CCTV is positioned is getting hotter and humid, it can cause a risk to your CCTV system. If you did not choose a suitable cable, the humidity could cause damage to your cable.

Another possibility is the area where your cable is placed is experiencing a high amount of moisture. If you have external cables that are coming through the ground, it can be affected by groundwater. When your CCTV cabling is exposed to a moisture environment, it will cause the cable jacket to crack and increase stress on the insulation, leading the cable to fail.

Over the years, we have embarked to be the best provider of security and surveillance systems for many homeowners and retailers here in Malaysia. All businesses, regardless of size, warrant our full attention and service. We know our clients definitely need to pay extra attention to such intricate security details at their workplace.

We are one of the leading home security providers in Johor Bahru, Malaysia empowers us to have the experience and true understanding of how security, particularly remote surveillance and access control security, is of uttermost value to any business.

Original Post: Troubleshoot Your CCTV Cabling Failure With 5 Shocking Tips (csisolution.com.my)